Wolverine 800 EFI 4WD UTV Video Gallery
The new Wolverine 800 UTV is loaded with features! This powerful machine has a 800cc 4 stroke liquid cooled V-Twin fuel injected engine that produces 55 horsepower. With a 9:5:1 compression ratio this UTV is packed with torque to conquer step grades.
Take advantage of the easy to shift fully automatic shaft drive CVT transmission with high/low range and reverse. Electric on command push button 4WD makes changing between 2wd and 4wd easy – on the fly while you are moving at low speeds. For those difficult situations on the trail you can also use the push button differential lock to provide power to both sides of the vehicle simultaniously.
A nice standard feature on this machine are four wheel dual piston ventilated disk brakes. Take the bite out of the terrain with the front & rear dual a-arm independent suspension that is fully adjustable to stiffen or soften the suspension to your particular riding style. Working in combination with the independent suspension is the standard Anti-Roll sway bars that help tremendously to keep you on all four wheels while ripping it up on those curvy riding trails.
The cockpit of this utility UTV is designed with the passengers in mind. A major improvement over the competition is that the seat height is designed to sit the riders several inches higher up for improved visibility and comfort when getting in and out of the machine. Fully adjustable wrap around bucket seats form to the contours of your body and provide position adjustment forwards or backwards to accommodate any size rider. Nylon seat belts and safety shoulder brace helps to keep the rider inside the side x side. Built with driver comfort in mind this unit comes standard with Tilt Steering wheel, and offers more leg room than a razor. This machine offers a fully adjustable passenger safety hand bar to secure them while riding, two drink holders, 12v plug in on the dash. Easily find out your MPH, RPM, fuel gauge, clock, park brake, gear you are in, temperature gauge, and if you are low on oil with it’s brightly lit digital in dash display.
The built in hood compartment offers some storage, and provides easy access to your antifreeze and brake fluid reservoirs. The cargo bed offers 400 lbs of load capacity and offers a locking tie down rail system to secure your load. On this model, the cargo bed does not dump. The cargo bed dimensions are 42″ W x 23″ L. In the rear you have a built in receiver to accept a hitch capable of towing up to 2000 lbs. to help you get the job completed. A Margard Lexan scratch resistant windshield will help to keep you protected from weather and debris while riding. You can add the rugged plastic top as an option to protect you from the weather.
We all know that things don’t always go as planned while you are riding, that is why this utility side by side comes with a 2500 lb. remote control winch. Simply plug winch controller cable in underneath the dash and safely stand to the side with the long remote control cable and operate the winch even if you are out riding alone.
Don’t stop riding just because the sun goes down. This powerful utility vehicle offers extremely bright high beam and low beam headlights and running tail lights and brake lights.
All of these features are packed into the new 2011 800 EFI Wolverine UTV to provide you with the best trail riding experience.
Professional Product Review by BJ Moose -
“First of all let me say one word about this machine. POWER. 800 glorious liquid cooled cc’s of it. I was able to really power through the turns and accelerate fast on the off road trails. The short wheel base makes this machine very agile in tight terrain. I enjoyed shooting the video footage you can watch about this beast on the trail in person. This UTV performs on the trails comparably to any other major name brand.
Another thing that I really liked was the way this UTV is setup in the cockpit allowing plenty of room to adjust the seat, and steering column to fit the way that I ride. I would recommend adjusting the 5 way adjustable shocks once you receive yours. From the crate, they could be softened a little.
I rode this clone side-by-side at the Brown Mountain ORV trails, then took it to the Carolina Adventure World and made it back with no problems what so ever. I wish I could say something for the negative column, but I just had too much fun!”
For an additonal $600 we can ship this unit fully assembled! Fully Assembled Units must be picked up at the trucking terminal! No exceptions. Unless assembly is ordered, your unit will require some assembly. Here is a quick rundown of what you can expect to assemble when you get your unit!
Dirt Bikes / Pit Bikes - Typical installation include mounting up the handlebars, installing the rear shock, and mounting up the front tire. From time to time you might have to put on little things like the gas cap and foot pegs. The unit comes full with break in oil.
ATVS / 4 Wheelers - Typical installation include mounting all 4 tires, mounting up the handlebars, and mounting up the luggage racks (if your unit comes with one). Sometimes you will have to install some small things like the gas cap, etc. The unit comes full with break in oil.
Scooters / Mopeds - Depending on what unit you get, here are some things you might have to mount on the scooter, Battery, Mirrors, Rear Storage Box, Windshield, Front Tire. Typically all scooters come fully assembled and you only have to put on a couple small things to make it complete. The unit comes full with break in oil.
UTV’S – Typical installation on the Wolverine 800 will include installing 4 upper shock bolts, mount wheels, install upper portion of the roll cage, install exhaust muffler with 2 bolts and 4 springs, install bed frame and mount plastics, install battery underneath drivers side seat and connect winch powers to the battery as well. Red wire is positive, Black wire is negative, install seats, mount steering wheel, install front hood plastic and bumper and bumper cover. You will need to change the shipping oil, differential fluids front and rear, flush and change radiator coolant. It is very important to check all bolts and nuts to ensure that they are tight on the whole machine.
- Change your oil according to the product manual to ensure long engine life.
- Check and Tighten any loose bolts after the first 4 hours of use.
- Regularly grease all grease fittings on the machine if applicable to your machine.
- Regularly check and replace the air filter according to the product manual if applicable to your machine.
ALL PRICES DO NOT INCLUDE SHIPPING PRICES. PLEASE CALL US TO GET THE BEST RATE. Once you make your purchase, we normally process it within 48 hours.
Please check your email as we will be sending you tracking information once it ships to the email you placed your order from. With all the spam filters it also a good idea to check your junk mailbox just to be sure it isn’t in there.
Parts – Parts purchased from us may be returned within 15 days of purchase. We require that the product is in original packaged NEW condition. Customer is responsible for shipping costs to send it back. Original shipping is not refunded and there is a 20% restocking fee for all parts returns.
Crated Units – Crated Units purchased from us may be returned within 3 days of delivery as long as the unit is in original packaged NEW condition. Customer is responsible for shipping costs to send it back. Original shipping is not refunded and there is a 20% restocking fee. Please ship to: Riders Wholesale 110 Orbit Rd. Statesville, NC 28677
Assembled Units – Assembled Units may NOT be returned once the shipping service has picked the unit up or customer has taken local delivery of the unit.
REMEMBER – Safety 1st
Ride Safe, Ride Smart
There’s only one thing better than getting ready to ride your Riders Wholesale ATV, UTV, Dirt Bike, or Scooter – and that’s learning how to do it safely. We want to help you to make the right decisions about your riding. We want to help you choose the right unit for your skill level, assist you in making the right judgments when riding and determine the proper helmet and equipment that will keep you as safe as possible.
Remember: safety starts with the rider. Read your owner’s manual and safety materials.
Be a Responsible Rider
Riding an ATV, motorcycle, UTV and dirt bike is an exercise in responsibility to yourself, to others, to the environment and to the sport. So remember: wear a helmet, eye protection and protective clothing whenever you ride. Never ride under the influence of drugs or alcohol, inspect your bike before riding & read your owner’s manual. Always obey local laws, use common sense, and respect the rights of others when you ride. Make sure you have a proper license when riding on public roads, and never modify your motorcycle’s exhaust system.
FOR YOUTH ATV BEGINNERS – Adjusting the Throttle Control before letting rider ride. When starting the unit up make sure that throttle control is as low as it can be tightened. The throttle control is located on the topside of the throttle on the handlebar. Loosen the nut and then tighten the screw down. Continually do this until you find the right adjustment to it’s safe enough to let your child ride. You’ll need to play with this to find the right speed.
Make sure the emergency brake is on before starting the unit. This is located on the left handlebar. Push the button in and clamp the brake before starting the unit up. To start the bike, the hand brake needs to be in a locked position anyway.
Make sure the rider is prepared to ride when the brake is released.
Tighten all bolts on wheels. Make sure wheels properly rotate.
Tighten all bolts on unit.
Make sure that handlebars, exhaust pipe, frame and other noticeable parts on bike are properly attached and bolted down.
Proper attire is warn.
These items should be warn at all times during riding.
Too many times people think they’re immune to wrecking so they’ll hop on the bike and just go. New riders are not used to the concept of using their thumb to accelerate. This causes the rider to increase acceleration and lose concentration. To avoid this, it is imperative to teach the rider how to do the following:
Show how to shut off engine with red shut off button (red button on left handlebar).
Ease into the acceleration by slowly pushing thumb throttle forward. If throttle should stick, show how to pull throttle back into neutral state.
Use right thumb to flick the throttle back into neutral.
Show rider how to “let off thumb throttle control” when rider is out of control.
Show rider how to stop with left hand brake.
Tell rider to not get distracted with adjusting helmets, boots or anything on the unit while riding or in acceleration mode. It is imperative the rider stops to adjust anything. They need to understand that by being safe to themselves and others riding, they need to be extremely careful about what they are doing is not distracting themselves.
People love riding and when they are shown the proper procedures of using their ATV, Dirt Bike, side by side, Scooter or Motorcycle, it’s a lot more fun and safe for everyone on the beaten path. That’s the Riders Wholesale way!