Wolverine 700 UTV 4WD EFI Video Gallery
[cvg-gallery galleryId='4' mode='showcase' limit='12' /]
Wolverine 700 UTV 4WD EFI – Yamaha Rhino Clone
Conquer step terrain with plenty of horsepower and torque while carrying 2 people as well as cargo in the dump bed. The water cooled, 4 stroke, 1 cylinder motor on this 2 Passenger side by side UTV was designed with a 4 valve head with durability and longevity in mind. Depend on it on the trail because it was developed by the Subaru Research and Development Team.
Electronic Fuel Injection! We are happy to announce that the new 700 EFI Wolverine UTV’s come standard with EFI fuel injection systems. The Wolverine 700 two seat side x side comes with a lot of Standard Features. This powerful 700cc engine was designed by the Subaru R&D team. This off road utility vehicle has a CVT belt driven clutch drive and has plenty of power to haul a huge load of friends and family or cargo. Digital display on the dash shows you your miles per hour, odometer, fuel gauge, built in clock, park brake, and gear you are in. Spend your time riding instead of changing gears with the standard Hi / Lo range automatic transmission with reverse. This Utility Off Road Vehicle shifts from H-L-N-R very easily. Included standard also is a lift assist Dump bed with bed mat. Unlike Polaris, all dump beds are stamped steel.
Get out of those sticky situations with a standard 2500 lb Remote Control Winch with a long cable so that one person can operate it from up to 4 ft. away. The winch remote cable plugs in under the dash.
Designed to carry up to 400 lbs of cargo without limiting dumping capability, and a towing capacity of 1500 lbs. this machine is made to be a work horse on the farm or job site. The bed dimensions are 43″ 3/4 W x 36″ L x 12″ D. Throw in 4 heavy duty tie downs located in all four corners of the dump bed to really secure your cargo. The tail gate folds down with ease for dumping materials out on the work site or farm. Four wheel disk brakes provide responsive stopping power while riding and are dual piston and has ventilated brake rotors. A front and rear fully adjustable independent suspension comes standard to soften or stiffen it to the way you like to ride. Put that together with 3 inches of travel on each corner and add 11.5 inches of ground clearance and you will find that this longer 2 seat utility vehicle can perform well while climbing over obstacles. Full Under body Armored Skid Plate protects components underneath and prevents damage to the under carriage. If you plan on using your machine for shallow water crossings, the air intakes are located at seat height beside the driver so that you can ride up to that deep without the motor cutting off.
Storage is abundant under the drivers side seat and a large glove compartment. Simply pull up the clip to release the seat to get to your storage compartments. The cockpit is also designed to be rider friendly with a 12v plug in to take your electronics and charge them while you are riding. The tough front bumper is steel encased in plastic to help protect your purchase. Safety for the passengers is built in with 2 safety belts to secure passengers as well as slotted steel handle grips built into the roll cage as well as a safety rail on each seat to keep you from falling out. Hardened PVC plastic side doors are standard and provided for the driver and front passenger. These three quarter half doors are great to keep water and mud out of the UTV while adding more protection for the driver and passenger. These doors are spring loaded to close and can be opened with a easy to access with a large latching door handle. Standard Equipment are four large fender flares to also keep you dry while traveling on those muddy paths. Rack and Pinion steering make turning this off road machine perform like a sports car. Enjoy riding your side x side at night with the standard high beam and low beam headlights, rear tail lights, and blue back lighted instrument panel. The hood flips up to provide easy access to checking your radiator fluid, and brake fluid. Also under the hood is the water tight battery compartment. What else could you want in a UTV? Check out our available optional equipment.
Included Equipment -
TOP – A rugged plastic Hard top to protect passengers. This roof is very flexible and break and chip resistant and also nice to have when you are riding in the trails in the rain, sleet, or snow.
WINDSHIELD – The Windshield is built out of a Margard Lexan material that is scratch resistant and provides excellent protection from spider webs and the wind on those cold mornings out riding.
CHROME WHEELS – Stylish Chrome alloy wheels and meaty radial tires also are an optional feature.
Professional Product Review by BJ Moose -
In Late 2007, I received my first Hisun 700 & 500 Utvs for sale. Riders Wholesale was the first company in the USA to do product testing with these machines. To be honest at first I really wasn’t really excited. I didn’t really think the quality would be good enough to sale in the states. My attitude changed and soon as we started putting the first one together.The welds on the machine were solid and was the best I had ever seen on a Chinese import i knew something was different about these models.The assembly was very simple and all the parts lined up very nice. It came time to put gas in after the engine turned over a couple times it roared to life. After we demoed them for a few hours, I was very impressed that it handled really well and they had plenty of power. The next thing i did was rode it down to road to the local Yamaha store. They couldn’t believe it either. We compared the rhino to the wolverine and we couldn’t tell the two apart after hours of studying to two models side by side. The few differences we did find was that the Wolverine was 3 inches wider and offered more room in the cockpit for leg room. Then we tried some rhino parts and accessories to see if they would really fit and they did. We determined that about 80 percent of the stock rhino parts would work as replacements on the Wolverine.
For the next 6 months, i took it on the trail and went riding just trying my best to break this thing. I took it to the Brown Mountain ORV trails and the Brushy Mountain motor sports park and rode it in real world conditions.
One other thing we tested was to see how much the side by side would pull. My dad owns a fence company that we have had in the family since 1969 called Dixie Fence Builders. He came to me one day trying to figure out how he was going to get some heavy fencing up the side of a mountain.We put 20 rolls on a trailer with a total weight of 2,000 pounds not counting the trailer.We used both units the 500&700 they both performed flawless to transport materials for his project and now he owns a wolverine 700 and has been using it for work performing various jobs. This UTV is a Yamaha Rhino Clone that performs on the trails comparably to a Polaris Razor, RZR, Polaris Ranger, Yamaha Rhino, Kawasaki Mule, Kubota RTV, or any other major name brand.In short, after spending countless hours trying to find a reason not to sell them, I am sure the Wolverine 700 or 500 will take anything you throw at it.
For an additonal $600 we can ship this unit fully assembled! Fully Assembled Units must be picked up at the trucking terminal! No exceptions. Unless assembly is ordered, your unit will require some assembly. Here is a quick rundown of what you can expect to assemble when you get your unit!
Dirt Bikes / Pit Bikes - Typical installation include mounting up the handlebars, installing the rear shock, and mounting up the front tire. From time to time you might have to put on little things like the gas cap and foot pegs. The unit comes full with break in oil.
ATVS / 4 Wheelers - Typical installation include mounting all 4 tires, mounting up the handlebars, and mounting up the luggage racks (if your unit comes with one). Sometimes you will have to install some small things like the gas cap, etc. The unit comes full with break in oil.
Scooters / Mopeds - Depending on what unit you get, here are some things you might have to mount on the scooter, Battery, Mirrors, Rear Storage Box, Windshield, Front Tire. Typically all scooters come fully assembled and you only have to put on a couple small things to make it complete. The unit comes full with break in oil.
UTV - Assembly for this unit involves mounting roll cage, all four top shock bolts, rear bed, mounting seats and headrests, steering wheel, steering column, front bumper, and battery installation.
- Change your oil according to the product manual to ensure long engine life.
- Check and Tighten any loose bolts after the first 4 hours of use.
- Regularly grease all grease fittings on the machine if applicable to your machine.
- Regularly check and replace the air filter according to the product manual if applicable to your machine.
ALL PRICES DO NOT INCLUDE SHIPPING PRICES. PLEASE CALL US TO GET THE BEST RATE. Once you make your purchase, we normally process it within 48 hours.
Based upon current demand ship times may vary. You may contact our office for current ship times.
Please check your email as we will be sending you tracking information once it ships to the email you placed your order from. With all the spam filters it also a good idea to check your junk mailbox just to be sure it isn’t in there.
Parts – Parts purchased from us may be returned within 15 days of purchase. We require that the product is in original packaged NEW condition. Customer is responsible for shipping costs to send it back. Original shipping is not refunded and there is a 20% restocking fee for all parts returns.
Crated Units – Crated Units purchased from us may be returned within 3 days of delivery as long as the unit is in original packaged NEW condition. Customer is responsible for shipping costs to send it back. Original shipping is not refunded and there is a 20% restocking fee. Please ship to: Riders Wholesale 110 Orbit Rd. Statesville, NC 28677
Assembled Units – Assembled Units may NOT be returned once the shipping service has picked the unit up or customer has taken local delivery of the unit.
REMEMBER – Safety 1st
Ride Safe, Ride Smart
There’s only one thing better than getting ready to ride your Riders Wholesale ATV, UTV, Dirt Bike, or Scooter – and that’s learning how to do it safely. We want to help you to make the right decisions about your riding. We want to help you choose the right unit for your skill level, assist you in making the right judgments when riding and determine the proper helmet and equipment that will keep you as safe as possible.
Remember: safety starts with the rider. Read your owner’s manual and safety materials.
Be a Responsible Rider
Riding an ATV, motorcycle, UTV and dirt bike is an exercise in responsibility to yourself, to others, to the environment and to the sport. So remember: wear a helmet, eye protection and protective clothing whenever you ride. Never ride under the influence of drugs or alcohol, inspect your bike before riding & read your owner’s manual. Always obey local laws, use common sense, and respect the rights of others when you ride. Make sure you have a proper license when riding on public roads, and never modify your motorcycle’s exhaust system.
FOR YOUTH ATV BEGINNERS – Adjusting the Throttle Control before letting rider ride. When starting the unit up make sure that throttle control is as low as it can be tightened. The throttle control is located on the topside of the throttle on the handlebar. Loosen the nut and then tighten the screw down. Continually do this until you find the right adjustment to it’s safe enough to let your child ride. You’ll need to play with this to find the right speed.
Make sure the emergency brake is on before starting the unit. This is located on the left handlebar. Push the button in and clamp the brake before starting the unit up. To start the bike, the hand brake needs to be in a locked position anyway.
Make sure the rider is prepared to ride when the brake is released.
Tighten all bolts on wheels. Make sure wheels properly rotate.
Tighten all bolts on unit.
Make sure that handlebars, exhaust pipe, frame and other noticeable parts on bike are properly attached and bolted down.
Proper attire is warn.
These items should be warn at all times during riding.
Too many times people think they’re immune to wrecking so they’ll hop on the bike and just go. New riders are not used to the concept of using their thumb to accelerate. This causes the rider to increase acceleration and lose concentration. To avoid this, it is imperative to teach the rider how to do the following:
Show how to shut off engine with red shut off button (red button on left handlebar).
Ease into the acceleration by slowly pushing thumb throttle forward. If throttle should stick, show how to pull throttle back into neutral state.
Use right thumb to flick the throttle back into neutral.
Show rider how to “let off thumb throttle control” when rider is out of control.
Show rider how to stop with left hand brake.
Tell rider to not get distracted with adjusting helmets, boots or anything on the unit while riding or in acceleration mode. It is imperative the rider stops to adjust anything. They need to understand that by being safe to themselves and others riding, they need to be extremely careful about what they are doing is not distracting themselves.
People love riding and when they are shown the proper procedures of using their ATV, Dirt Bike, side by side, Scooter or Motorcycle, it’s a lot more fun and safe for everyone on the beaten path. That’s the Riders Wholesale way!