|Engine type:||4-stroke, single cylinder, water cooled|
|Max torque:||16 lb ft/5000rpm|
|Bore x stroke:||2.85 x 2.63 inches|
|Climbing ability:||18 degrees|
|Starting system:||Electric Start|
|Carburetor brand:||JF (RX)|
|Engine oil:||TK (Vacuum film)|
|Clutch:||Automatic CTV with reverse|
|Driveline / Driving wheel:||Chain+Shaft / Dual wheel drive|
|Suspension, F / R:||Double A-arm / Independent Swing-arm|
|Brakes, F / R:||Both hydraulic brakes, Disc|
|Tires, F / R:||20×7-8 / 22×10-10|
|Fuel capacity:||2.25 gal|
|Weight, G.W. / N.W.:||705 lbs / 617 lbs|
|Max load:||500 lbs|
|OA L x W x H:||90.5×53.1×57.1 inches|
|Height to seat:||13.8 inches|
|Min ground clearance:||8.5 inches|
|Shipping information:||30 units/40HQ|
Units ship from our warehouse and realistically it will take 5 to 7 business days to receive your order from the time it is placed until it arrives.
- Change your oil according to the product manual to ensure long engine life.
- Check and Tighten any loose bolts after the first 4 hours of use.
- Regularly grease all grease fittings on the machine if applicable to your machine.
- Regularly check and replace the air filter according to the product manual if applicable to your machine.
- Check the chain tension and tighten if needed according to the product manual.
Once you make your purchase, we normally process it within 48 hours. Click here to read our shipping policy.
Please be aware that UTV, Scooter, and ATV orders placed usually ship from the warehouse in 7-10 business days. Once it ships it usually takes 2-5 business days to reach you.
Please check your email as we will be sending you tracking information once it ships to the email you placed your order from. With all the spam filters it also a good idea to check your junk mailbox just to be sure it isn’t in there.
Vehicle Owner’s Responsibilities:
Vehicle’s owner must read and follow the instruction listed in the owner’s manual to perform correct operation and maintenance for the vehicle.
All warranty repairs must be pre-approved by Riderswholesale, llc. and performed by authorized dealers. Vehicle owner must keep a copy of all purchase and warranty documents, and also keep a copy of regular maintenance receipts. ALL PARTS MUST BE SHIPPED BACK TO RIDERSWHOLE FOR INSPECTION BEFORE WARRANTY PARTS ARE ISSUED UNLESS THEY ARE PREAPPROVED BY SOME ONE AT RIDERSWHOLE. Most TIMES WE JUST NEED A PICTURE OF THE BAD PART.
All new Riderswholesale vehicles come with limited warranty. Warranty starts from the date of purchase by the consumer or dealer.
Every Riderswholesale vehicle is built to exceptional standards. We back it up with these Limited Warranty Coverages. Parts are not under warranty if not listed below.
Coverage Period 6 Months (Unlimited Miles) Parts Only
Valves, Valve Springs, Cylinder Head, Piston,Piston Rings, Piston Pins And Clips, Rod, Rod Bolts, Rod Bearings, Crank Shaft, Main Bearings, Cap Bolts
Transmission, Transmission Components, Drive Shaft, Axles, CVT Joints
EXCLUDES BELT, CLUTCH, VARIATOR
Coverage Period 6 Months (Unlimited Miles) Parts Only
Carburetor, Intake Manifold, Fuel Pump, Fuel Injectors
(EXCLUDES GUMMED UP CARBURETOR OR FUEL INJECTORS DUE TO BAD GAS)
Wiring Harness, Engine Control Module, Startor, Regulator, Rectifer
Radiator, Water pump, Thermostat, Cooling fans.
Calipers, Rotors, Resevoirs
Parts – Parts purchased from us may be returned within 15 days of purchase. We require that the product is in original packaged NEW condition. Customer is responsible for shipping costs to send it back. Original shipping is not refunded and there is a 20% restocking fee for all parts returns.
Crated Units – Crated Units purchased from us may be returned within 3 days of delivery as long as the unit is in original packaged NEW condition. Customer is responsible for shipping costs to send it back. Original shipping is not refunded and there is a 20% restocking fee. Please ship to: Riders Wholesale 110 Orbit Rd. Statesville, NC 28677
Assembled Units – Assembled Units may NOT be returned once the shipping service has picked the unit up or customer has taken local delivery of the unit.
REMEMBER – Safety 1st
Ride Safe, Ride Smart
There’s only one thing better than getting ready to ride your Riders Wholesale ATV, UTV, Dirt Bike, or Scooter – and that’s learning how to do it safely. We want to help you to make the right decisions about your riding. We want to help you choose the right unit for your skill level, assist you in making the right judgments when riding and determine the proper helmet and equipment that will keep you as safe as possible.
Remember: safety starts with the rider. Read your owner’s manual and safety materials.
Be a Responsible Rider
Riding an ATV, motorcycle, UTV and dirt bike is an exercise in responsibility to yourself, to others, to the environment and to the sport. So remember: wear a helmet, eye protection and protective clothing whenever you ride. Never ride under the influence of drugs or alcohol, inspect your bike before riding & read your owner’s manual. Always obey local laws, use common sense, and respect the rights of others when you ride. Make sure you have a proper license when riding on public roads, and never modify your motorcycle’s exhaust system.
FOR YOUTH ATV BEGINNERS – Adjusting the Throttle Control before letting rider ride. When starting the unit up make sure that throttle control is as low as it can be tightened. The throttle control is located on the topside of the throttle on the handlebar. Loosen the nut and then tighten the screw down. Continually do this until you find the right adjustment to it’s safe enough to let your child ride. You’ll need to play with this to find the right speed.
Make sure the emergency brake is on before starting the unit. This is located on the left handlebar. Push the button in and clamp the brake before starting the unit up. To start the bike, the hand brake needs to be in a locked position anyway.
Make sure the rider is prepared to ride when the brake is released.
Tighten all bolts on wheels. Make sure wheels properly rotate.
Tighten all bolts on unit.
Make sure that handlebars, exhaust pipe, frame and other noticeable parts on bike are properly attached and bolted down.
Proper attire is warn.
These items should be warn at all times during riding.
Too many times people think they’re immune to wrecking so they’ll hop on the bike and just go. New riders are not used to the concept of using their thumb to accelerate. This causes the rider to increase acceleration and lose concentration. To avoid this, it is imperative to teach the rider how to do the following:
Show how to shut off engine with red shut off button (red button on left handlebar).
Ease into the acceleration by slowly pushing thumb throttle forward. If throttle should stick, show how to pull throttle back into neutral state.
Use right thumb to flick the throttle back into neutral.
Show rider how to “let off thumb throttle control” when rider is out of control.
Show rider how to stop with left hand brake.
Tell rider to not get distracted with adjusting helmets, boots or anything on the unit while riding or in acceleration mode. It is imperative the rider stops to adjust anything. They need to understand that by being safe to themselves and others riding, they need to be extremely careful about what they are doing is not distracting themselves.
People love riding and when they are shown the proper procedures of using their ATV, Dirt Bike, side by side, Scooter or Motorcycle, it’s a lot more fun and safe for everyone on the beaten path. That’s the Riders Wholesale way!